NRPE » Historique » Version 12
Patrice Nadeau, 2017-05-19 16:52
| 1 | 2 | Patrice Nadeau | h1. Nagios Remote Plugin Executor |
|---|---|---|---|
| 2 | 1 | Patrice Nadeau | |
| 3 | > https://exchange.nagios.org/directory/Addons/Monitoring-Agents/NRPE--2D-Nagios-Remote-Plugin-Executor/details |
||
| 4 | |||
| 5 | Ce « add-on » se divise en deux parties |
||
| 6 | * Le « plugin » _check_nrpe_ qui roule sur le serveur Nagios pour exécuter les vérifications sur des machines distantes. |
||
| 7 | * Le deamon _nrpe_ qui roule comme agent sur la machine sous surveillance |
||
| 8 | |||
| 9 | 4 | Patrice Nadeau | {{TOC}} |
| 10 | 3 | Patrice Nadeau | |
| 11 | 8 | Patrice Nadeau | h2. Prérequis |
| 12 | |||
| 13 | <pre><code class="bash"> |
||
| 14 | 12 | Patrice Nadeau | zypper install make gcc libopenssl-devel |
| 15 | 10 | Patrice Nadeau | # Remove if already installed with the OS |
| 16 | zypper remove nrpe |
||
| 17 | 8 | Patrice Nadeau | </code></pre> |
| 18 | |||
| 19 | 2 | Patrice Nadeau | h2. Téléchargement |
| 20 | 1 | Patrice Nadeau | |
| 21 | <pre><code class="bash"> |
||
| 22 | mkdir ~/tmp |
||
| 23 | cd ~/tmp |
||
| 24 | wget https://github.com/NagiosEnterprises/nrpe/archive/nrpe-3.1.0.tar.gz |
||
| 25 | # Décompresse le fichier |
||
| 26 | tar xvf nrpe-3.1.0.tar.gz |
||
| 27 | cd nrpe-nrpe-3.1.0 |
||
| 28 | </code></pre> |
||
| 29 | |||
| 30 | 2 | Patrice Nadeau | h2. check_nrpe |
| 31 | 1 | Patrice Nadeau | |
| 32 | <pre><code class="bash"> |
||
| 33 | # openSUSE |
||
| 34 | ./configure |
||
| 35 | 7 | Patrice Nadeau | # Debian/Ubuntu |
| 36 | 1 | Patrice Nadeau | ./configure --with-ssl=/usr/bin/openssl --with-ssl-lib=/usr/lib/arm-linux-gnueabihf |
| 37 | # All Linux |
||
| 38 | make clean |
||
| 39 | make check_nrpe |
||
| 40 | make install-plugin |
||
| 41 | </code></pre> |
||
| 42 | |||
| 43 | Un fois compilés, les exécutables ne sont pas copiés au bons endroits. On doit donc le faire manuellement. |
||
| 44 | |||
| 45 | <pre><code class="bash"> |
||
| 46 | 5 | Patrice Nadeau | # openSUSE |
| 47 | 1 | Patrice Nadeau | mkdir -p /usr/local/nagios/libexec |
| 48 | cp src/check_nrpe /usr/local/nagios/libexec |
||
| 49 | cp sample-config/nrpe.cfg /etc |
||
| 50 | 5 | Patrice Nadeau | # Debian/Ubuntu |
| 51 | 1 | Patrice Nadeau | sudo cp src/check_nrpe /usr/local/nagios/libexec |
| 52 | cp sample-config/nrpe.cfg /etc |
||
| 53 | </code></pre> |
||
| 54 | |||
| 55 | 2 | Patrice Nadeau | h2. nrpe |
| 56 | 1 | Patrice Nadeau | |
| 57 | <pre><code class="bash"> |
||
| 58 | # openSUSE |
||
| 59 | 9 | Patrice Nadeau | ./configure --enable-command-args |
| 60 | 1 | Patrice Nadeau | # All Linux |
| 61 | make clean |
||
| 62 | make nrpe |
||
| 63 | make install-daemon |
||
| 64 | make install-config |
||
| 65 | make install-init |
||
| 66 | systemctl enable nrpe.service |
||
| 67 | systemctl start nrpe.service |
||
| 68 | </code></pre> |